Basic Info.
After-sales Service
Lifetime
Seals Mode
Trilateral Seals
Sealing & Cutting
Heat-Sealing Cold-Cutting
Machine Type
Bag Forming Machine
Type
Paper Bag Making Machine
Transport Package
Wooden Case
Specification
L15000*W1900*H1932(mm)
Product Description
1.All heat insulation boards use: mica quartz board;Adaptation:1). Material: various composite films, OPP, BOPP, PET, PE, CPP, etc.;2). Bag-making bag type: three-side seal; four-side seal; stand-up pouch; one-piece stand-up pouch;3).Thickness range of plastic composite film: 40~160μm;4).The main film roll material-the maximum width: 1200 mm, the maximum diameter: 800 mm.5). Self-supporting roll material---Maximum width: 100 mm, Maximum diameter: 600 mm.Adaptability:1). Bag making speed: 180 segments/min (mechanical design speed 200 segments/min) about 45M. Stand-up bag + speed value range: 30-120 segments/min (bag width≤130mm, bag height≤410mm, thickness≤90ūm)Speed value of one-piece stand-up pouchRange: 30-120 segments/min (bag width≤130mm, bag height≤200mm, thickness≤90ūm); secondary cutting speed: 30-100 segments/min; (according to bag length, original film material, bag width and system Set the maximum bag making speed for bag specifications, etc.2). Bag-making specifications and dimensions:The height range of the bottom of the stand-up pouch: 20~50mm;Three-side sealing bag width: 80~580mm (length can be 6 times delivery);Double outlet stand-up pouch (width×height): 80~250×120~275mm;3). Bag-making length: 60-250 mm (multiple feeding device can be used when super long), and the length can be manually set up to 400mm if it exceeds 250 mm.4). The accumulated length error of bag making is ±0.3mm (per 100 bags), and the color printing positioning photoelectric. Under the premise of the genuine film, the photoelectric color mark will not be lost. The hot seal of the production bag should be flat, clear and beautiful.Note: (Due to the bag type, material and other reasons, the actual operating speed will decrease).Unwinding method: single unwinding1). Main film material: horizontal unwinding reel, K-shaped folding frame;2). Self-supporting reel material: horizontal unwinding shaft;3). Main unwinding control: automatic constant tension control by floating roller, magnetic powder brake, encoder, etc.;4). Self-supporting unwinding control: automatic constant tension control by floating roller, magnetic powder brake, encoder, etc.;Drive mode:Host frequency conversion motor, four traction;1). Feeding. Traction: AC servo motor drive;2). Upper and lower sealing pressure: Driven by variable frequency motor;Operation function:1). Heat sealing: heat sealing speed + preset speed;2). Temperature: 16 channels, SSR non-contact automatic control, touch screen display;3). Automatic counting: can be preset;4). Finished bag delivery: the delivery volume can be preset;5). Punching device: time can be preset, continuous and interval can be set; 6). Working methods: color bag, white bag, two working methods;7). Double delivery method: 2 to 6 times delivery maximum length 250mm;8). Selection: you can choose to feed the material without moving, move up and down to adjust the cutter;9). Prompt information: a. Photoelectric loss b. Abnormal temperature c. Unwinding alarm d. Servo motor alarm e. Tension alarm. Automatic shutdown and other fault prompts.Electricity and other main configuration:1. Feeding drive AC motor: specifications The first traction 1.0 KW×1 = 1.0 KW;The second traction 1.5 KW×1 = 1.5 KW;The third traction 1.5 KW×1 = 1.5 KW;The fourth traction 1.5 KW×1 = 1.0 KW;2. AC motor driven by upper and lower sealing pressure: Specification 3.7KW×1=3.7KW;4. Servo motor for secondary cutter: specificationsCut off 0.75 KW×1 = 0.75KW;5. Unwinding traction motor: 0.55 KW×1 = 0.55 KW;6. Self-supporting traction motor: 0.4KW×2 = 0.8KW7. Horizontal sealing heat sealing device (sealing knife is aluminum) 3 KW×4 groups of 8 channels = 24KW. The length of the electric heating plate is 640mm, the width is 80mm, 3 groups are used for heating, and 1 group is used to strengthen the bottom of the self-supporting bag.8. Horizontal sealing cooling device: 2 groups; cooling block structure type: hot knife separated type, length 640mm, width 80mm;8. Vertical sealing and heat sealing device (sealing knife is aluminum): 3KW×6 groups of 12 channels = 36KW. The length of the electric heating plate is 800mm, the width is 70mm, (there are two groups for hot zipper)9. Vertical sealing cooling device: 6 groups; length 400mm, width 70mm. (There are two groups for cooling the zippers)10. Control system and others: Japanese Panasonic PLC control, touch screen operation.Total: about 70.35KW.11. Voltage: 380V /50HZ;12. Air pressure: 0.6 Mpa (6 KWfcm2)13. Cooling water: about 15L/min14. Black phosphate treatment of surface parts.15. Approximate dimensions: length×width×height 15000×1900×1932mm.16. Approximate weight: 6800KG.Introduction to the main units of the machine---1. Main film unwinding unit:1) The unwinding air shaft is fixed, and the material is automatically loaded. It can load roll films with a diameter of ≤ ф800mm and a width of ≤ 1200mm. There are pneumatic locking devices on both sides of the unwinding rack. The unwinding tension has a magnetic powder brake (2.5 Nm) and a roller type. The tachometer encoder performs automatic constant tension control, which is not limited by the size of the roll diameter, and at the same time, there is a pneumatic tension floating roller and a material break protection device in the middle;2) The unwinding traction motor 0.55KW keeps synchronous output with the main machine, and the unwinding material has a horizontal position after entering the 45º angle plate and then changes to a vertical position;3) Vector frequency conversion control;4) Unwinding correction control method: analog control, reducing the inertia brought by the unwinding correction positive and negative control, higher correction control accuracy, correction without jitter, and low mechanical noise;5) End-of-material alarm control: the photoelectric is detected, and the end-of-material alarm lamp flashes and the buzzer outputs;2. Left---Right stand-up pouch unwinding unit:1) Unwinding air shaft, horizontal structure type;2) The unwinding tension has a magnetic powder brake (1.5 Nm) and a roller speed encoder for automatic constant tension control, which is not limited by the size of the roll diameter, and at the same time there is a pneumatic tension floating roller and a material break protection device in the middle;3) The unwinding traction roller motor is 0.4KW, and the unwinding material enters the 45º angle plate from the horizontal position, and it changes to a normal form;4) Vector frequency conversion control;3. Main film high tension swing rod unit:1) The light-weight material high-strength pendulum rod reduces the tension inertia at high speeds;2) Unwinding control adopts: high-precision linear potentiometer analog feedback, with the frequency converter for speed control under high-speed operation, to achieve smooth acceleration and deceleration at high speed;4.the longitudinal sealing heat sealing unit: the length of the electric heating plate is 800mm, the cooling length is 400mm, and the width is 70mm1) Up and down corresponding to heat sealing and cooling devices, independent left and right movement adjustment, one-way tool straight line adjustment;2) The effective length of heat sealing is 800mm, and the width is 70mm; the effective length of cooling is 400mm, and the width is 70mm. There are upper and lower protective ironing cloths and film holders for adjusting the bottom position of the special self-supporting bag accessories.5. Horizontal sealing heat sealing unit: electric heating plate length 640mm, cooling length 640mm, width 80mm1) The effective length of heat sealing is 640mm, and the width is 80mm; the effective length of cooling is 640mm, and the width is 80mm;2) There is a high-position parking device in the horizontal seal;6. Secondary cutter unit: 1) Cut off 0.75KW AC servo (Japan Panasonic), gearbox reduction ratio 1:5; cutter7. Countertop output unit: Static elimination is to solve the irregularities after cutting and avoid the drift of finished bags; The table conveyor has the function of conveying adjustment, with the functions of segment and batch conveying.8. Punching unit:1) Stand-up pouch punching device: punching die moving frame/1 set, the overall left and right moving screw for fine adjustment; round hole punching die Φ16mm/2 sets (used for punching the bottom material of stand-up pouch);2) Horizontal seal punching device: die moving frame/2 sets, the overall left and right moving screw for fine adjustment; tear hole punching die 2*4mm/1 set; round hole punching die ¢6mm/1 set;Nine, waste edge winding unit: 2 units.Random spare partsHorizontal seal hot knife 640 long 10/15/20/25 point hot block according to the size of the horizontal seal knife5 eachLongitudinal sealing hot knife 840 long 10/15/20/30 3 each1 set of toolsUpper cutter 1 pieceLower cutter 1 piece2 thermocouplesMain equipment configurationNumber of producing areasMain control system Panasonic PLC (high speed) Japan 1 setDisplay Taiwan Vinylon 10.4 inches Taiwan 1 setMain computer driven servo motor 4KW, Japan Panasonic 1 setThe first drive servo motor 1.5KW 1 set of Panasonic JapanThe second drive servo motor 1.5KW Japan Panasonic 1 setThe third drive servo motor 1.5KW Japan Panasonic 1 set4th drive servo motor 1.0KW 1 set of PanasonicCutter cutting Servo motor 0.75KW Japan Panasonic 1 setUnwinding AC motor AC AC motor 0.55KW Dedong, China 1Host servo reducer Deceleration box 1:15 Taiwan Shengbang 1Cutter servo reducer deceleration box 1: 5 Taiwan Shengbang 1Main unwinding brake Magnetic powder brake 2.5Nm .1 onlySelf-supporting unwinding brake magnetic powder brake 1.5Nm 1 pcAnalog correction mode bat 1 setIntermediate photoelectric positioning optical and electric probes Ties Italy 2 pcsMain film unwinding tension encoder constant tension Hangzhou 1 pcSelf-supporting unwinding tension constant tension Hangzhou 2 setsLow-voltage electrical components CHINT/Schneider.
Address:
No 58, Sanmen County, Taizhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Packaging & Printing, Tools & Hardware, Transportation
Management System Certification:
ISO 20000
Company Introduction:
Tai Zhou YueHao Machinery Co., Ltd develops and manufactures all kinds of food processing and packaging machines. With the development and enlargement of mass clients abroad, now we have set up cooperative relationships with hundreds of Chinese machinery and raw material manufacturers. On the other hand, we can supply the best products with the best prices for our overseas clients with our professional experience and good reputation.
The company is having strong hold in the domestic market of China and also exporting products to over 75 Countries World wide. We have many reputed names in our clientele, both from domestic and international market.
We can also offer complete turn-key plant & Individual machines for packaging and processing food products like Breads, Biscuits Candy, Chocolate, Toffee, Ball Lollipop, Flat Lollipop, Ball gum, Bubble gum etc. The Turn- Key solutions offered by us includes preparation of project report, technical consultancy, supply of machinery, raw material & Packing material, supply of men power, commissioning of the plant etc.
Having a team of experts who understand the food industry inside out, you can be assured of getting the best machines and services at the most competitive price.
Welcome to contact us for more information.